H3C 3600

发布时间：2019-08-05 15:35:17编辑：auto阅读（1739）

 

h3c s3600配置案例： （网络环境是：划分vlan101到vlan104加vlan1 六个vlan，vlan1 的ip是 192.168.0.30/24，且在vlan1 中有一台dhcp 服务器（windows2003搭建），ip为192.168.0.10，其 他五个vlan分别为vlan 1 的子网，各个vlan间要求可以互通，其他vlan 共用vlan里的dhcp服务器 ，自动获得ip；另外这个环境中在交换机前面还有一台防火墙，防火墙和交换机相连的端口一定要配置 成trunk模式，并且一定的在防火墙上加四条静态路由，分别到达内部的四个vlan子网，网关为vlan1 的ip，防火墙的ip和vlan1在一个网段） <h3c-3600>display current-configuration #查看所有的配置信息 <h3c-3600>display version               #查看版本信息 <h3c-3600>system-viem                   #进入系统视图 [h3c-3600]vlan 101                      #创建vlan 101（批量创建：vlan 101 to 5） [h3c-3600-vlan101]name testvlan         #给vlan命名 [h3c-3600-vlan101]port e1/0/1 to e1/0/5 e1/0/7 e/1/011#批量把端口加入到vlan101 [h3c-3600-vlan101]quit [h3c-3600]interface vlan-interface 101 [h3c-3600-vlan-interface101]ip address 192.168.2.1 255.255.255.192 [h3c-3600-vlan-interface101]quit [h3c-3600]vlan 102 [h3c-3600-vlan102]name guanglivlan   [h3c-3600-vlan102]quit [h3c-3600]interface vlan-interface 102 [h3c-3600-vlan-interface102]ip address 192.168.2.65 255.255.255.192 [h3c-3600-vlan-interface102]quit [h3c-3600]int e1/0/1 [h3c-3600-e1/0/1]port link-type trunk [h3c-3600-e1/0/1]port trunk permit vlan all #允许所有vlan通过，否则只允许vlan 1 通过 。。。。。。。。。。。。。其他配置略。 配置DHCP Relay 本节主要介绍DHCP Server的配置，对于举例中的DHCP Relay设备配置，只进行最简单的介绍，保证 其可以将DHCP请求转发至DHCP Server。 <H3C> system-view [H3C] dhcp-server 1 ip 192.168.0.10（dhcp服务器的ip） [H3C] interface Vlan-interface 101 [H3C-Vlan-interface5] dhcp-server 1 [H3C] interface Vlan-interface 102 [H3C-Vlan-interface102] dhcp-server 1 .。。。。。。。。。。。。。。。。。。。。。 由于原来交换机的ios版本比较低，导致配到第三vlan时，配置好后测试拿不到ip ，甚至导致其他 vlan也获取不到ip，手动去配ip也不通到达vlan，最后按下面的方式升级ios版本，问题解决。 1.1  通过命令行远程升级 用户在本地计算机上运行FTP Server，注意配置了用户名和密码，以及正确的文件所在目录（假设IP 地址为10.10.110.1)。同时用户通过Telnet远程登录到交换机上，利用FTP将主机程序传送到交换机 上。 假设主机程序为SWITCH.bin，BOOTROM程序为SWITCH.btm。在用户通过Telnet远程登录到交换机上后，进行下列操作。 第一步：通过FTP将软件下载到交换机上。 <H3C> ftp 10.10.110.1 Trying ...                                                                      Press CTRL+K to abort                                                         Connected.                                                                      220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user User(none):lyt                                                                  331 Give me your password, please                                           Password:                                                                       230 Logged in successfully       [ftp] get SWITCH.bin SWITCH.bin [ftp] get SWITCH.btm SWITCH.btm (如果空间不足，可以在系统模式下删除原来的ios，命令如下： [h3c]delete flash:/SWITCH.bin [ftp] bye 第二步，加载BOOTROM。 <H3C> boot bootrom SWITCH.btm please wait ... Bootrom is updated! 第三步，加载主机软件。 <H3C> boot boot-loader SWITCH.bin <H3C> display boot-loader The app to boot at the next time is: flash:/SWITCH.bin <H3C> reboot（重启前请确认其他配置是否保存，防止重启后造成配置丢失） 通过以上操作即可完成BOOTROM和主机软件的加载。需要注意的是，加载主机软件必须通过reboot命令重起交换机才能使加载成功。如果 Flash memory空间不够，可以首先完成BOOTROM的加载，然后删除flash中的部分程序文件（建议删除已不使用的某主机程序），再将加载用的主机程序 通过FTP上载到交换机来完成主机程序的加载。注意，在加载过程中不可断电。 注意：如果Flash memory空间不够，可以首先完成BOOTROM的升级，然后再将主机程序通过FTP上载到交换机上完成主机程序的升级。          s3600上的具体配置信息：          <H3C3600>          <H3C3600>dis cu                #   sysname H3C3600                 #   dhcp-server 1 ip  192.168.0.10                                #  radius scheme system                     #  domain system              #  local-user admin                  password simple shineit                          service-type telnet                      level 3         #  acl number 2000                 rule 1 permit               #  vlan 1       #  vlan 101 to 104                #  interface Vlan-interface1                           ip address 192.168.0.30 255.255.255.0                                       #  interface Vlan-interface101                             ip address 192.168.2.1 255.255.255.192                                         dhcp-server 1               #  interface Vlan-interface102                             ip address 192.168.2.65 255.255.255.192                                        <H3C3600>dis cu                #   sysname H3C3600                 #   dhcp-server 1 ip  192.168.0.10                                #  radius scheme system                     #  domain system              #  local-user admin                  password simple shineit                          service-type telnet                      level 3         #  acl number 2000                 rule 1 permit               #  vlan 1       #  vlan 101 to 104                #  interface Vlan-interface1                           ip address 192.168.0.30 255.255.255.0                                       #  interface Vlan-interface101                             ip address 192.168.2.1 255.255.255.192                                         dhcp-server 1               #  interface Vlan-interface102                             ip address 192.168.2.65 255.255.255.192                                          dhcp-server 1               #  interface Vlan-interface103                             ip address 192.168.2.129 255.255.255.192                                           dhcp-server 1               #  interface Vlan-interface104                             ip address 192.168.2.193 255.255.255.192                                           dhcp-server 1               #  interface Aux1/0/0                   #  interface Ethernet1/0/1                         port access vlan 103                      #  interface Ethernet1/0/2                         port access vlan 102                      #  interface Ethernet1/0/3                        #  interface Ethernet1/0/4                         port access vlan 101                      #  interface Ethernet1/0/5                        #  interface Ethernet1/0/6                         port access vlan 104                      #  interface Ethernet1/0/7                        #  interface Ethernet1/0/8                        #  interface Ethernet1/0/9                        #  interface Ethernet1/0/10                         #  interface Eth            #  interface Ethernet1/0/12                         #  interface Ethernet1/0/13                         #  interface Ethernet1/0/14                         #  interface Ethernet1/0/15                         #  interface Ethernet1/0/16                         #  interface Ethernet1/0/17                         #  interface Ethernet1/0/18                         #  interface Ethernet1/0/19                          port link-type trunk                       port trunk permit vlan all                            #  interface Ethernet1/0/20                         #  interface Ethernet1/0/21                         #  interface Ethernet1/0/22                          port link-type trunk                       port trunk permit vlan all                            #  interface Ethernet1/0/23                          port link-type trunk                       port trunk permit vlan all                            #  interface Ethernet1/0/24                          port link-type trunk                       port trunk permit vlan all                            #  interface GigabitEthernet1/1/1                               #  interface GigabitEthernet1/1/2                               #  interface GigabitEthernet1/1/3                                port link-type trunk                       port trunk permit vlan all                            #  interface GigabitEthernet1/1/4                               #   undo irf-fabric authentication-mode                                     #  interface NULL0                #   telnet source-interface Vlan-interface1                                         #   voice vlan mac-address 0001-e300-0000 mask ffff-ff00-0000                                                           #   ip route-static 0.0.0.0 0.0.0.0 192.168.0.1 preference 60                                                           #   telnet-server source-interface Vlan-interface1                                                #  user-interface aux 0 7                       user-interface vty                  acl 2000 inbound                   user privilege level 3                         set authentication password simple shineit                                             history-command max-size 20                              screen-length 30                   protocol inbound telnet                         user-interface vty 1 4                        acl 2000 inbound                  # return <H3C3600>dis ver H3C Comware Platform Software Comware Software, Version 3.10, Release 1602P10 #（升级后的版本） Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd. All rights reserved. H3C S3600-28TP-SI uptime is 0 week, 0 day, 1 hour, 8 minutes H3C S3600-28TP-SI with 1 Processor 64M     bytes DRAM 8196K   bytes Flash Memory Config Register points to FLASH Hardware Version is REV.B CPLD Version is CPLD 003 Bootrom Version is 514 [Subslot 0] 24 FE Hardware Version is REV.B [Subslot 1] 4 GE  Hardware Version is REV.B <H3C3600>

关键字：